pcb land pattern suggested l a yout, t o l e r a n c e t o b e w i t h i n . 0 0 2 50 ? 180 voltage variable 400 to 660 mhz phase shifter narrow band case style: bk276 outline dimensions ( ) inch mm maximum ratings pin connections outline drawing phase shifter electrical specifcations rev. a m151107 JSPHS-661+ ed-13020 wz/cp/am 150817 a bcd e fg .450 .803 -- .100 .250 .102 .100 11.43 20.40 -- 2.54 6.35 2.59 2.54 h j k l wt .047 .065 .065 .470 grams 1.19 1.65 1.65 11.94 3.0 typical performance data JSPHS-661+ operating temperature -40c to 85c storage temperature -55c to 100c rf input power 20 dbm max. control voltage 20v features ? low insertion loss, 1.2 db typ. ? good vswr, 1.2:1 typ. ? j-leads for excellent solderability and strain relief ? aqueous washable applications ? signal processing JSPHS-661+ phase shift 0 100 200 300 400 024681012 control voltage (v) phase shift (deg.) 400 mhz 510 mhz 660 mhz JSPHS-661+ vswr 1.0 1.2 1.4 1.6 1.8 2.0 024681012 control voltage (v) vswr 400 mhz 510 mhz 660 mhz JSPHS-661+ insertion loss 1.0 1.2 1.4 1.6 1.8 2.0 0 2 4 6 8 10 12 control voltage (v) insertion loss (db) 400 mhz 510 mhz 660 mhz frequency (mhz) phase range (degrees) insertion loss (db) control voltage (v) control bandwidth (khz) vswr (:1) min. ty p. max. ty p. ty p. max. 400-660 180 1.2 2.5 0-12 dc-50 1.2 2.2 control voltage (v) phase shift* (degrees) vswr (:1) insertion loss (db) 400 mhz 510 mhz 660 mhz 400 mhz 510 mhz 660 mhz 400 mhz 510 mhz 660 mhz * normalized at control voltage = 0v in 1 out 7 bias 4,6^ ground 2,3,5,8,9,10,11,12,13,14 rf in contr ol v ol t a ge rf out electrical schematic 0.0 0.01 0.01 0.02 1.71 1.45 1.56 1.50 1.38 1.37 1.0 27.08 14.39 6.14 1.64 1.44 1.56 1.50 1.43 1.41 2.0 57.73 32.00 13.34 1.56 1.37 1.55 1.44 1.45 1.45 3.0 93.24 57.12 23.57 1.50 1.29 1.54 1.32 1.46 1.56 4.0 129.69 93.86 40.22 1.48 1.18 1.48 1.19 1.41 1.54 5.0 159.07 136.75 67.58 1.51 1.09 1.35 1.09 1.27 1.56 6.0 178.10 170.91 105.08 1.55 1.08 1.15 1.07 1.13 1.51 7.0 189.31 192.06 141.95 1.57 1.10 1.03 1.04 1.06 1.40 8.0 196.02 204.60 169.46 1.59 1.13 1.09 1.06 1.02 1.28 9.0 200.35 212.48 188.21 1.60 1.15 1.11 1.07 1.00 1.18 10.0 203.35 217.84 201.16 1.61 1.16 1.10 1.07 1.00 1.11 11.0 205.58 221.75 210.54 1.62 1.17 1.09 1.07 0.99 1.06 12.0 207.31 224.74 217.61 1.62 1.18 1.07 1.07 0.99 1.02 demo board mcl p/n: tb-122 suggested pcb layout (pl-030) maximum operating power, 0 dbm dc input resistance at control port: 2000 ohms typ. permanent damage may occur if any of these limits are exceeded. ^ proper operation is achieved with pins 4 or 6 or both connected to bias. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
